Edirol UA-20 Owner's Manual page 20

Driver installation and settings (Windows)
6
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking
or similar software, be sure to exit it as well.
7
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your
computer.
8
Click the Windows Start menu. From the menu that appears,
select "Run..."
The "Run..." dialog box will appear.
9
In the dialog box that appears, input the following into the
"Open" field, and click [OK].
fig.05-5_30
(drive name) : \Driver\XP2k\SETUPINF.EXE
* In the explanatory example shown here, the drive name is given as
"D:". The drive name "D:" may be different for your system.
Specify the drive name of your CD-ROM drive.
The SetupInf dialog box will appear.
You are now ready to install the driver.
10
Set the UA-20's ADVANCE (mode select) switch to the ON
position.
11
Use the USB cable to connect the UA-20 to your computer.
20
To check the drive name
In the Windows desktop,
double-click the My Computer
icon. In the window that
appears, check the drive name
of the CD-ROM drive into
which you inserted the CD-
ROM in step7.
The drive name is the (D:) or
(E:) displayed by the CD-ROM
drive .
This unit is equipped with a
protection circuit. A brief
interval (a few seconds) after
connecting the USB cable is
required before the unit will
operate normally.