Choosing A Pattern - Roland V-Drums TD-8 Owner's Manual

Using Preset Patterns
You cannot save any changes you make to the settings in
Preset patterns. While you can make temporary changes to
these settings, they revert to the settings already selected for
that Preset pattern when another pattern is selected.
Furthermore, preset patterns cannot be edited or recorded.
• The following appears in the display when you attempt
to change the settings.
• The following appears in the display when you attempt
to edit or record the settings.
If you want to change, edit, or record any Preset pattern
settings, copy them to a User pattern (p. 113). When User
pattern settings are altered, the changes are saved
automatically.
About Preset Pattern Copyright
The sounds, phrases and patterns contained in this
product are sound recordings protected by copyright.
Roland hereby grants to purchasers of this product the
permission to utilize the sound recordings contained in
this product for the creation and recording of original
musical works; provided however, the sound recordings
contained in this product may not be sampled,
downloaded or otherwise re-recorded, in whole or in
part, for any other purpose, including but not limited to
the transmission of all or any part of the sound
recordings via the internet or other digital or analog
means of transmission, and/or the manufacture, for sale
or otherwise, of any collection of sampled sounds,
phrases or patterns, on CD-ROM or equivalent means.
The sound recordings contained in this product are the
original works of Roland Corporation. Roland is not
responsible for the use of the sound recordings
contained in this product, and assumes no liability for
any infringement of any copyright of any third party
arising out of use of the sounds, phrases and patterns in
this product.
Chapter 5 Playing Along with Patterns

Choosing a Pattern

fig.06-002b
1. Press [PATTERN].
[PATTERN] lights, and the "PATTERN" screen appears.
2. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
select the pattern.
You can select the pattern category by pressing CURSOR
[ ] to move the cursor to "CATEG."
About Preset Pattern Divisions
The character appearing at the end of the Preset pattern
name indicates the division (phrase type).
The six different Preset pattern division types are shown
below.
Division Indicator
INTRO -I
MAIN A -A
MAIN B -B
FILL 1 -1
FILL 2 -2
ENDING -E
Example
BRIT_R-I
BRIT_R-A
BRIT_R-B
BRIT_R-1
BRIT_R-2
BRIT_R-E
97