Roland TD-8 Service Notes

Roland TD-8 Service Notes

Percussion sound module
Hide thumbs Also See for TD-8:

Advertisement

Quick Links

TD-8

TABLE OF CONTENTS

FACTORY RESET
Procedure for updating the software
Test mode
Copyright © 1999 by ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
本書の一部、もくしは全部を無断で複写・ 転載することを禁じます
17059979
SERVICE NOTES
First Edition
Issued by RJA
目次
主な仕様 ........................................................................................................ 1
パネル配置図 ................................................................................................. 2
パネル配置図パーツリスト ........................................................................... 2
分解図パーツリスト ...................................................................................... 2
分解図ネジパーツリスト ............................................................................... 2
分解図 ........................................................................................................... 3
ワイヤリング配置図 ...................................................................................... 4
パーツリスト ................................................................................................. 5
バージョンナンバーの確認方法 .................................................................... 7
データのセーブとロードの方法 ..................................................................... 7
ファクトリーリセットの方法 ....................................................................... 8
バージョンアップの方法 ............................................................................... 8
テストモード ................................................................................................. 9
ブロック図 .................................................................................................. 13
基板図 (Main) .............................................................................................. 14
回路図 (Main) .............................................................................................. 16
基板図 (Jack, Volume, Panel) .....................................................................24
回路図 (Jack, Volume) ................................................................................ 26
回路図 ( Panel) ............................................................................................. 2 7
メッセージ/エラー・メッセージ一覧 .......................................................28
変更案内 ...................................................................................................... 30
Printed in Japan AA00 (DP)
Specifications
TD-8
: Percussion Sound Module
(Conforms to General MIDI System)
Sound Generator
Variable Drum Modeling
Page
Maximum Polyphony
64 Voices
Instruments
Drum Instruments:
1,024
Backing Instruments:
262
Drum Kits
64
Drum Kit Chains
16 chains (32 steps per chain)
Effect Types
Ambience
2 Band-Master Equalizer
Sequencer
Preset Patterns:
700
User Patterns:
100
User Songs:
50
Parts:
Play Functions:
Oneshot, Loop, Tap
Resolution:
192 ticks per quarter note
Recording Method:
Real-time
Tempo
20-260
Display
32 × 136 dots
(backlit graphic LCD)
:7 segments, 2 characters (LED)
Sliders
4 (switchable)(Kick, Snare, Hi-
Hat, Toms/Cymbals,Others,
Backing, Click)
Preview Button
Programmable Preview Velocity
(3 steps)
Connectors
Trigger Input Jacks (dual) × 10
Master Output Jacks(L(MONO),
R)
Direct Output Jacks(L, R)
Phones Jack (stereo)
Mix in Jack (stereo)
Hi-Hat Control Jack
Foot Switch Jack(dual)
MIDI Connectors
(IN,OUT/THRU)
主な仕様
TD-8:パーカッション・サウンド・モジュール
(GM システム対応)
音源方式
Output Impedance
バリアブル・ドラム・モデリング
1.5 k ohms
最大同時発音数
Power Supply
64 音
AC Adaptor (DC 9V)
音色数
Current Draw
ドラム・ インスト:
600 mA
バッキング・ インスト:262
Dimensions
ドラム・ キット数
293 (W) × 223 (D) × 80 (H) mm
64
11-9/16 × 8-13/16 × 3-3/16
inches
ドラム・キット・チェーン
16 チェーン
Weight
(32 ステップ /1 チェーン)
1.5 kg / 31 lbs 5 oz (Excluding
AC Adaptor)
エフェクト・ タイプ
アンビエンス
2 バンド・マスター・イコラ
Accessories
イザー
Owner 's Manual
ENGLISH
(#71450312)
シーケンサー
JAPANESE (#71346356)
プリセット・ パターン:700
6
AC Adaptor(ACI/ACB Series)
ユーザー・ パターン: 100
100V:ACI-100C (#00905756)
ユーザー・ ソング:
117V:ACI-120C (#00905767)
パート数:
230V:ACI-230C (#01018312)
再生機能:
230VE:ACB-230E(#01458278)
ワンショット、ループ、タップ
240V:ACB-240 (#12449549)
分解能 :
192 クロック /4 分音符
Options
レコーディング方法 :
Pad (PD-120, PD-100, PD-80,
リアルタイム
PD-80R, PD-9, PD-7, PD-5)
Kick Trigger Unit (KD-120,
テンポ
KD-80, KD-7)
20 ~ 260
Hi-Hat Control Pedal (FD-7)
Stand (MDS-10, MDS-8, MDS-
ディスプレイ
7U)
32 × 136 ドット
Cymbal Mount (MDY-7U)
(バック照明付き LCD)
Pad Mount (MDH-7U)
7 セグメント 2 桁(LED)
Foot Switch (BOSS: FS-5U)
Foot Switch Cable (PCS-31)
スライダー
4(スイッチによる切り替え)
(キック、スネア、ハイハッ
* In the interest of product
ト、タム/シンバル、 パー
improvement, the
カッション・ パート、バッキ
specifications and/or
ング、クリック)
appearance of this unit are
subject to change without prior
プレビュー・ ボタン
notice.
ベロシティー設定可能
(3 段階)
接続端子
トリガー・ インプット・
ジャック(デュアル)× 10
マスター・ アウトプット・
ジャック(L(MONO)、R)
ダイレクト・ アウトプット・
ジャック(L、R)
ヘッドホン・ ジャック
(ステレオ)
Sep. 1999
ミックス・イン・ジャック
(ステレオ)
ハイハット・コントロール・
ジャック
フット・スイッチ・ジャック
(デュアル)
MIDI コネクター
1,024
(イン、アウト/スルー)
出力インピーダンス
1.5kΩ
電源
AC アダプター(DC 9V)
消費電流
600mA
外形寸法
293(幅)× 223(奥行き)
× 80(高さ)mm
重量
1.5kg
(AC アダプターを除く)
50
6
付属品
取扱説明書
和文:(#71346356)
英文:(#71450312)
AC アダプター(ACI-100C)
(#00905756)
保証書
(#40232334)
別売品
パッド
(PD-120、PD-100、PD-80、
PD-80R、PD-9、PD-7、PD-5)
キック・トリガー・ユニット
(KD-120、KD-80、KD-7)
ハイハット・コントロール・
ペダル(FD-7)
スタンド
(MDS-10、MDS-8、MDS-
7U)
シンバル・マウント
(MDY-7U)
パッド・マウント
(MDH-7U)
フット・スイッチ
(BOSS:FS-5U)
フット・スイッチ・ケーブル
(PCS-31)
※ 製品の仕様および外観は、 改
良の た め予 告な く変 更す る
ことがあります。
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TD-8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Roland TD-8

  • Page 1: Table Of Contents

    Copyright © 1999 by ROLAND CORPORATION MIDI Connectors ダイレクト・ アウトプット・ (IN,OUT/THRU) ジャック(L、R) All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. ヘッドホン・ ジャック 。 本書の一部、もくしは全部を無断で複写・ 転載することを禁じます (ステレオ) 17059979...
  • Page 2: Location Of Controls パネル配置図

    TD-8 Sep. 1999 Location of controls / パネル配置図 Location of controls parts list / パネル配置図パーツリスト Note1 : The parts marked # are new ( initial parts). 注意 1 : #マークの付いた部品は新規部品です。 NO. PART CODE / 品番 PART NAME / 品名 DESCRIPTION / 規格名 Q’TY / 数...
  • Page 3: Exploded View 分解図

    TD-8 Sep. 1999 Exploded View / 分解図...
  • Page 4: Wiring Diagram ワイヤリング配置図

    TD-8 Sep. 1999 Wiring diagram / ワイヤリング配置図 CN3 on Main to CN101 CN5 on Main to LCD UNIT on JACK FUJI CARD FUJI CARD 16×300-A4.0BB-P1.0-HBL10 30×45-A6.0BB-P1.25-HBL10 (23475341) (01896189) CN9 on Main to CN201 on Volume CN6 on Main to CN1 on Panel WIRING 15×170-P2.0-51065-51015-F...
  • Page 5: Parts List パーツリスト

    TD-8 Sep. 1999 PARTS LIST / パーツリスト 02019467 HD6437016E10F IC (32BIT CPU) IC15 on Main SAFETY PRECAUTION: *1 The parts marked CONSIDERATIONS ON PARTS ORDERING Main ---> Main Board Assy The parts marked have # are new (initial When ordering any parts listed in the parts list, please specify the following items in the order...
  • Page 6 TD-8 Sep. 1999 00567067 RPC05T 221 J MTL.FILM RESISTOR CHIP on Main C339,C349,C350,C355,C359,C369,C370, 00567101 RPC05T 391 J MTL.FILM RESISTOR CHIP on Main C376,C382 on Main 00566912 RPC05T 220 J MTL.FILM RESISTOR CHIP on Main 01673634 GRM40CH102J50PT10 CERAMIC CAPACITOR CHIP on Jack...
  • Page 7: Checking The Software Versio バージョンナンバーの確認方法

    ば、その設定が再現されます。 external sequencer.Everything is done automatically. ※ このとき、 TD-8 上のデータは上書きされます。 必要に応じてバッ クアップをとってから、操作を行ってください。 * At this time, the TD-8’s data is overwritten. Back up any important data as needed before carrying out this operation. ※ シーケンサーやコンピュータに保存した TD-8 のデータを受信す るときは、エクスクルーシブ・メッセージを送信したときと同じ デバイス ID ナンバーに設定してください。...
  • Page 8: ファクトリーリセットの方法

    FACTORY RESET Procedure for updating the software ファクトリーリセットの方法 バージョンアップの方法 All data and settings stored in the TD-8 are lost in carrying out this opera- TD-8 に記録されている、 パッドやインストの設定、パターンやソン Necessary items 用意するもの tion. Follow the procedures described in “Bulk Dump” to save any data and グのデータを製品出荷時の設定に戻します。...
  • Page 9: テストモード

    1. Connect the AC adapter. 1. AC アダプターを接続します。 Connect the FD-7 (hi-hat control pedal). FD-7( ハイハット・コントロール・ペダル ) を接続します。 Use the PCS-31 to connect the FS-5U (foot switch) to the TD-8. FS-5U( フット ・ スイッチ ) を PCS-31 を使って本体に接続します。 MIDI Cable Stereo headphones 2.
  • Page 10 TD-8 Sep. 1999 The display will show the following items. (2) Disconnect the MIDI cable. 画面には以下のものを表示します。 (2) MIDI ケーブルを抜きます。 • CPU (CPU Internal ROM) version ・ CPU (CPU Internal ROM) バージョン • CPU (CPU Internal ROM) check sum (3) If the result is OK, you will automatically proceed to the next test.
  • Page 11 TD-8 Sep. 1999 6. LCD/Encoder Test 6. LCD/Encoder Test 7. AD test 7. AD Test (1) Separately move each of the four group faders from the lowest to the (1) グループ・フェーダー4本を、1本ずつ一番下から一番上(また highest position (or from the highest to the lowest). Make sure that the は一番上から一番下)まで動かします。0 - 127 の値が表示され、...
  • Page 12 TD-8 Sep. 1999 9. Trigger test (DSP) 9. Trigger Test (DSP) OUTPUT OUTPUT (1) Connect the PD-120 or PD-80R to 3 SNARE, and strike the HEAD and • MASTER-MASTER L+R (1) PD-120 または PD-80R を 3 SNARE に接続し、HEAD と RIM を...
  • Page 13: Block Diagram ブロック図

    TD-8 Sep. 1999 Block diagram / ブロック図 SVRs LED MIX IN MIX IN light on IC101(Jack Board) static SW/LED PHONES PHONES IC56 matrix unit TRIGGER MASTER Value Dial MASTER IC57 DIRECT 4->1 PANEL VSNARE[A/B] CODEC IC50 IC11 IC12 CLICK MASTER...
  • Page 14: Circuit Board 基板図 (Main)

    TD-8 Sep. 1999 Circuit board / 基板図 (Main) Main Board Assy 71346323 For EU Countries Apparatus containing Lithium batteries ADVARSEL! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren.
  • Page 15 TD-8 Sep. 1999 Circuit board / 基板図 (Main) View from solder side.
  • Page 16: Circuit Diagram / 回路図 (Main) 1/8

    TD-8 Sep. 1999 Circuit diagram / 回路図 (Main) 1/8 MAINBOARD (Page 1/8) CPU section PANEL_IF section TRIGGER section LP[0..7] LP[0..7] LP[0..7] RIM[0..9] BLOCK DIAGRAM RIM[0..9] RIM[0..9] ANPAD[0..6] R X W ANPAD[0..6] ANPAD[0..6] R X W R X W A N S V R...
  • Page 17 TD-8 Sep. 1999 Circuit diagram / 回路図 (Main) 2/8 CPU section page 2/8 R 1 0 9 4 7 0 k MEMORY section C 3 3 8 R 1 0 8 10/16 X W R H 4 7 0 k...
  • Page 18 TD-8 Sep. 1999 Circuit diagram / 回路図 (Main) 3/8 MEMORY section page 3/8 D[0..15] User area A[0..21] Program Pattern for design IC39 Pattern for MP I/O8 section I/O7 IC36 IC37 I/O6 D Q 1 5 D Q 1 5 I/O5...
  • Page 19 TD-8 Sep. 1999 Circuit diagram / 回路図 (Main) 4/8 TG section C 2 9 1 C 1 2 3 C 3 7 5 100/16 C 2 9 3 C 1 1 0 page 4/8 IC54 C 2 9 5 C 3 7 6...
  • Page 20 TD-8 Sep. 1999 Circuit diagram / 回路図 (Main) 5/8 ANALOG section page 5/8 PWB01896089 00では、C7に10/16が実装される。 PWB01896089 01では、100/16が実装される。 Adaptor Power この部品を交換する場合は、どの基板の版でも100/16を使用すること。 R262 section (1/2W) AN77L05M MA147 H ... MUTE L ... OUTPUT 100/16 MUTECTRL C385 100/16 XDACRST 2SC4081 2SA1576A 100k MUTE...
  • Page 21 TD-8 Sep. 1999 Circuit diagram / 回路図 (Main)6/8 TRIGGER Section MA142WK PEDAL1 C405 R245 page 6/8 C140 図はPWB01896089 01 の回路。 HHCTRL 1000p PWB01896089 00 の回路は DA29 下部囲みを参照。 R165 MA147 R131 PEDAL0 図はPWB01896089 01 の回路。 RD5.1MB 5.6k R133 PWB01896089 00 の回路は...
  • Page 22 TD-8 Sep. 1999 Circuit diagram / 回路図 (Main) 7/8 JACK_IF section with Power supply and MIDI page 7/8 TRIGGER section C N 3 P P A D H H P P A D H H P R I M H H...
  • Page 23 TD-8 Sep. 1999 Circuit diagram / 回路図 (Main)8/8 PANEL_IF section page 8/8 C247 C N 5 LP[0..7] Section R X W LCD UNIT R X W JACK_IF Section XRST R345 52807-1610 C248 C250 C252 C254 C256 C258 0.01 1000p 1000p...
  • Page 24: Circuit Board 基板図 (Jack, Volume, Panel)

    TD-8 Sep. 1999 Circuit board / 基板図 (Jack, Volume, Panel) Volume Board Assy 71346389 Panel Board Assy 71346378 View from components side. Jack Board Assy 71346390...
  • Page 25 TD-8 Sep. 1999 Circuit board / 基板図 (Jack, Volume, Panel) View from Solder side.
  • Page 26: Circuit Diagram 回路図 (Jack, Volume)

    TD-8 Sep. 1999 Circuit diagram / 回路図 (Jack, Volume) JACK BOARD & VOLUME BOARD L 1 1 9 J K 1 0 7 L 1 2 0 H L J 7 0 0 1 - 0 1 - 3 0 1 0...
  • Page 27: Circuit Diagram 回路図 ( Panel)

    TD-8 Sep. 1999 Circuit diagram / 回路図 (Panel) with ENCODER BOARD PANEL BOARD C N 1 10/16 A N S V R M X S V R 1 M X S V R 0 P D 6 P D 6...
  • Page 28: Messages And Error Messages メッセージ/エラー・メッセージ一覧

    • CHECKSUM ERROR! ・CHECKSUM ERROR! Error Messages エラー・メッセージ一覧 If the TD-8 is not able to operate correctly or if an incorrect operation was TD-8 の画面にエ ラー・メッセージ・ウ ィンドウが表 示されたとき performed, a message window will appear in the screen. Read following は、何らかの理由で TD-8 が正しく動作できないか、操作方法に誤...
  • Page 29 TD-8 Sep. 1999 • NOT ENOUGH MEMORY! • 99 STEP MAXIMUM ・NOT ENOUGH MEMORY! ・99 STEP MAXIMUM Pattern recording or editing could not be carried out because there was not The maximum number of steps that can be recorded to one song has been パターンのレコーディングやエディットを実行するため...
  • Page 30: Changes 変更案内

    TD-8 Sep. 1999 Changes 変更案内 1. Main board 1. メインボード Change made from S/N ZM72700~. シリアルナンバー ZM72700 より改版が行われます。 The circuitry and parts used will differ because of this change. 改版により、回路と使用部品が異なります。 Circuit boards prior to the change can be distinguished by the revision 改版前後の基板は、変更履歴で区別できます。...

Table of Contents

Save PDF