Roland V-Drums TD-8 Owner's Manual page 59

5
Press [F1 (SHELL)].
The "SHELL" screen appears.
fig.Q4-034
6
Press CURSOR [
7
Press [INC/+] or [DEC/-] or rotate the VALUE dial to select the
head type.
Here, change this from "CLEAR" to "COATED" and compare the difference
in sound.
fig.Q4-036
This completes selection of the head material. Next, tune the head.
8
Press CURSOR [
9
Press [INC/+] or [DEC/-] or rotate the VALUE dial to adjust the
tuning.
Here, change the setting from "0" to "+30."
fig.Q4-038
10
Press [KIT].
The "DRUM KIT" screen appears.
fig.Q4-038a
] or [ ] to move the cursor to "HEAD TYPE."
] to move the cursor to "TUNING."
Modifying a Drum Kit
In the "SHELL" screen, you
can make settings for the
shell depth, head type, and
tuning.
59