Muting A Specific Part (Part Mute) - Roland V-Drums TD-8 Owner's Manual

Chapter 5 Playing Along with Patterns
1. Follow the procedures described in "Choosing a
Percussion Instrument" (p. 105) to select the instrument
to be changed.
2. Press [F3 (EDIT)].
3. Press CURSOR [
] or [
parameter to be set.
4. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
5. Press [PATTERN].
The "PATTERN" screen appears.
LEVEL: 0–127
This adjusts the volume.
AMB LEVEL: 0–127
This adjusts the Ambience level.
PAN: L15–CTR (Center)–R15, RND, ALT
This adjusts the left-right placement of the sound. "L15"
is far left, "CTR" is center, and "R15" is far right.
PITCH: -480–+480
DECAY: -31–+31
With certain instruments, you may not be able to raise (or
lower) "PITCH" and "DECAY" settings beyond a certain
fixed value.
106
] to move the cursor to the
Muting a Specific Part
(PART MUTE)
You can mute specific parts in patterns or songs.
The part mute settings will remain in effect even if you
change the pattern or song
fig.06-022.e
Press [SHIFT]
1. Press [PATTERN], then [F2 (
[PATTERN] lights, and a pop-up menu appears.
2. Press [DEC/-], rotate the VALUE dial, or press CURSOR
[ ] to move the cursor to "MUTE."
3. Press [F2] to confirm your choice.
The "PART MUTE" screen appears.
You can also set this by pressing [SHIFT] + [MIXER].
4. Use the following operations to mute the parts
individually.
The muted part icon is cleared.
Muting part Display
Drum Kit Part USR/KT
Percussion Part DRM/PC Refer to p. 107
Part 1 PART 1
Part 2 PART 2
Part 3 PART 3
Part 4 PART 4
5. Press [PATTERN].
The "PATTERN" screen appears.
PART)].
Operation
[F1 (USR/KIT)]
[F3 (PART 1)]
[SHIFT] + [F1 (PART 2)]
[SHIFT] + [F2 (PART 3)]
[SHIFT] + [F3 (PART 4)]