Editing A Pattern; Copying A Pattern [Copy] - Roland V-Drums TD-8 Owner's Manual

Editing a Pattern

You can edit user patterns.
User patterns in which Pattern Lock (p. 119) set to "ON"
cannot be edited. A warning screen appears in the display if
you attempt to make such changes in subsequent operations.
fig.06-043
For instructions on turning off the Pattern Lock, refer to p.
119.

Copying a Pattern [COPY]

Copy the pattern as is to the User patterns.
fig.06-044.e
1 2 3 4 5
SRC
1 2 3 4 5
DEST
Part instruments and volume and other settings are
copied just as they are. When copying only the
performance data, refer to "Copying Part of a Pattern by
Measures" (p. 114).
fig.06-045
1. Press [PATTERN], then [F3 (
[PATTERN] lights, and a pop-up menu appears.
2. Press [INC/+] or [DEC/-], rotate the VALUE dial, or
press CURSOR [ ] or [
"EDIT."
3. Press [F3] to confirm your choice.
The "PATTERN EDIT" screen appears.
4. Press CURSOR [
] to move the cursor to "EDIT."
5. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
select "COPY."
The "COPY" screen appears.
6. Press CURSOR [
] to move the cursor to "SOURCE."
6 7 8
6 7 8
MENU)].
] to move the cursor to
Chapter 5 Playing Along with Patterns
7. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
choose the copy-source pattern.
8. Press CURSOR [
] to move the cursor to "DEST."
9. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
choose the copy-destination pattern.
10. Press [F3 (COPY)].
The confirmation screen appears.
fig.06-046
11. Press [F3 (EXEC)].
Press [F1 (CANCEL)] to cancel the operation.
SOURCE: 1–800
This specifies the pattern to be used as the copy source.
Indicated from left to right are the pattern number and
pattern name.
DEST: 701–800
This specifies the User pattern to be used as the copy
destination.
Indicated from left to right are the pattern number and
pattern name.
113