Setting Write Protection For A User Pattern (Pattern Lock) - Roland V-Drums TD-8 Owner's Manual

[SHIFT] + [F3 (SPACE)]
The character at the cursor position is replaced by a
blank space.
The following characters may be used.
A–Z, 0–9, !, ", #, $, %, &, ', (, ), [, ], *, +, ,, -, ., /, :, ;,
, ?, _,
Chapter 5 Playing Along with Patterns
Setting Write Protection for a
User Pattern (PATTERN LOCK)
To prevent accidental erasure or editing, you can lock User
patterns.
fig.06-068
, =,
1. Follow the procedures described in "Choosing a Pattern"
(p. 97) to select the User pattern to be locked.
2. Press [PATTERN], then [F3 (
3. Press [INC/+], rotate the VALUE dial, or press the
CURSOR [
4. Press [F3] to select.
The "LOCK" screen is displayed.
fig.06-069
5. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
PATTERN LOCK: OFF, ON
OFF:
This unlocks the User pattern.
ON:
This locks the User pattern. No recording, erasing, or
editing can be executed in the pattern.
MENU)].
] to move the cursor to "LOCK."
119