Adjusting The Panning (Stereo Position); Adjusting The Overall Drum Kit Volume - Roland V-Drums TD-8 Owner's Manual

Adjusting the Panning (Stereo
Position)
Set the pan (localization) for each of the pads.
fig.04-009
1. Press [MIXER].
[MIXER] lights, and the "MIXER" screen appears.
2. Press CURSOR [
] or [
"PAN."
3. Strike a pad.
The cursor moves to the knob for the pad that was
struck.
4. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
Rotating the knob to the right (or pressing [INC/+])
places the sound more to the right; rotating the knob to
the left (or pressing [DEC/-]) places the sound more to
the left.
5. Press [KIT].
The "DRUM KIT" screen appears.
PAN: L15–CTR–R15, RND, ALT
CTR (CENTER):
Positions the sound in the center.
RND (RANDOM):
The pan changes randomly each time the pad is struck.
ALT (ALTERNATE):
The pan alternates left and right each time the pad is
struck.
Chapter 3 Making the Settings for the Studio and Mixer
] to move the cursor to
Adjusting the Overall Drum Kit
Volume
You can adjust the overall volume of the drum kit while
preserving the volume balance between each of the pads.
fig.04-010
1. Press [MIXER].
[MIXER] lights, and the "MIXER" screen appears.
2. Press CURSOR [
] to move the cursor to "MASTR."
3. Press [INC/+] or [DEC/-] or rotate the VALUE dial to
make the setting.
Rotating the knob to the right (or pressing [INC/+])
increases the volume; rotating the knob to the left (or
pressing [DEC/-]) decreases the volume.
4. Press [KIT].
[KIT] lights, and the "DRUM KIT" screen appears.
MASTR (MASTER VOLUME): 0–127
93