Advertisement
3. ASSEMBLY
NOTE: This machine is delivered already assembled. If parts of the machine are not
assembled upon delivery, please follow the instructions below. If there is a problem with
the assembly, contact our customer service.
It is recommended that the machine is assembled by 2 people.
a. Protective cover
Pass the protective cover over the work table. Put the tabs in the two holes on the work table.
Tighten the tab screws to secure the cover securely on the work table.
b. Pendulum handle
Unscrew the knobs. Insert the handle tubes into the supports on the back of the log holder.
Adjust the handle to the desired height then lock it with the knobs.
15
Advertisement
