Advertisement
Note:
Always install the transport brace before transporting the saw.
To keep the saw blade from rusting, spray with Cleaning and Maintenance Spray (optional
accessory) before storing it for a longer time.
Every 50 hours of operation
Check all screwed connections, tighten if necessary (Rocker and rocker stop must remain
movable).
Check saw blade for firm seat, wear and sharpness.
Remove any deposits that may have build up inside the saw blade cover.
Draining
The first emptying must be done after 10h or 1 year after the first use. This operation must be
carried out by a qualified service.
Air filter
Remove the cover, remove the foam element and wash it with petrol. Let it dry well in the sun.
Saturate it with engine oil then press it firmly to distribute the oil evenly and remove the excess.
Reinsert it into its housing, respecting the mounting direction.
Remove the tank and empty it into a suitable container. Wash it with liquid detergent and water
then dry it. Reassemble by putting new SAE 10W30 engine oil in the filter bowl. The filling level
is indicated on the tank.
Change the oil in the air filter every 25 hours or once a year. Clean the filter regularly, especially
in a dusty atmosphere.
For more explanations, refer to the engine manual or ask your dealer for advice.
25
Advertisement
