Advertisement
toxic carbon monoxide; Contact with the toxic exhaust gases can lead to unconsciousness and
death.
• The muffler will be very hot during operation and will remain hot for a while after the engine
has stopped. Be careful not to touch the muffler when it is still hot. To avoid serious burns or the
risk of fire, allow the engine to cool down before transporting it or storing it indoors.
Warning! The setting parameters must not be modified.
Warning! Exhaust gas, fuel and lubricant are toxic.
The installation and repair of the engine may only be carried out by trained personnel.
SAFE WORKING PRACTICE
It is essential all operators are:
-
Adequately trained in the use, adjustment and operation of the machine;
-
Instructed in factors that influence exposure to noise e.g.:
saw blade designed to reduce the emitted noise;
saw blade and machine maintenance.
-
Informed of factors that influence exposure to dust e.g.:
type of material being machined;
importance of local extraction(capture at source);
proper adjustment of hoods/baffles/chutes;
where provided, dust extraction equipment to be switched on before commencing
machining.
It is important that:
-
During operation the machine is standing on level, horizontal ground and that the floor area
around the machine is level, well maintained and free from loose material e.g. chips and
off-cuts;
-
Adequate general or localized lighting is provided;
-
Stock and finished workpieces are located close to the operator's normal working position.
It is essential for the operator to:
8
Advertisement
