Advertisement
■ Injuries caused by touching the rotating parts
■ Injuries caused by disruption of the cutting blade
These risks are most evident:
■ Within the range of operation
■ Within the range of the rotating machine parts
In spite of the application of the relevant safety regulations and the implementation of safety
devices, certain residual risks cannot be avoided. These are:
■ Impairment of hearing.
■ Risk of accidents caused by the uncovered parts of the rotating cutting blade.
■ Risk of injury when changing the blade.
■ Risk of squeezing fingers when opening the guards.
- Braking should be verified every before use, running the machine,
stop the engine,
then check
the stopping time.
- Only saw blades made in conformity to EN 847-1:1997 shall be used on the machine;
- The machine during indoor use shall be connected to an external chip and dust extraction
system;
DESCRIPTION OF THE SYMBOLS
The use of symbols in this manual is intended to draw your attention to possible risks. The safety
symbols and the explanations that accompany them must be perfectly understood. The
warnings in themselves do not remove the risks and cannot replace correct actions for
preventing accidents.
Read the operator's manual.
Before any use, refer to the corresponding paragraph in the present manual.
10
Advertisement
