Related Manuals for Hyundai HY2163
Summary of Contents for Hyundai HY2163
-
Page 1: User Manual
230V 1600 Watt Circular Saw USER MANUAL Model shown HY2163 BEFORE USE YOU MUST READ THIS MANUAL COMPLETELY – RETAIN FOR FUTURE USE Licensed by Hyundai Corporation, Korea... -
Page 2: Table Of Contents
CONTENTS o’s Page N Section Description 1. OWNER’S MANUAL & SAFETY INSTRUCTIONS 2. GENERAL SAFETY 3 – 5 3. SPECIFIC SAFETY INSTRUCTIONS 5 – 6 4. QUICK REFERENCE GUIDE and USE 5. OPERATION, CONTROLS & INSTRUCTIONS 7 – 9 6. GENERAL MAINTENANCE 7. -
Page 3: Owner's Manual & Safety Instructions
1. OWNER’S MANUAL & SAFETY INSTRUCTIONS 1.1. How to read the manual. 1.1.1. Keep this manual for the safety warnings and precautions, assembly, operation, inspection, maintenance and cleaning procedures. 1.1.2. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). - Page 4 2.2.3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 2.2.4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
-
Page 5: Specific Safety Instructions
2.4.7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. 2.4.8. Use of the power tool for operations different from those intended could result in a hazardous situation. - Page 6 3.10. Causes and operator prevention of kickback: 3.11. Kickback is the result of saw miscue and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as below: 3.11.1. Maintain a firm grip with both hands on the saw and position your arms to resist kickback forces.
-
Page 7: Quick Reference Guide And Use
3.21.3. Do not throw the packaging away, keep it safe throughout the guarantee period, then recycle if possible, otherwise dispose of it by the proper means. 3.21.4. Do not let children play with empty plastic bags due to the risk of suffocation. 4. -
Page 8: Operation, Controls & Instructions
5. OPERATION, CONTROLS & INSTRUCTIONS You must turn off saw and isolate from the mains before carrying out any maintenance work on this tool. 5.1. Replacing the saw blade. 5.1.1. Engage the blade lock button (13) and unscrew the blade clamping screw (14) by turning counter clockwise using the spanner (15) supplied with the tool. - Page 9 5.6. Bevel Adjustment. 5.6.1. The bevel angle can be adjusted between 0° and 45°. 5.6.2. Loosen the bevel adjustment knob (10). 5.6.3. Set the bevel angle by tilting the saw shoe (6) until the mark indicates the desired angle on the scale. 5.6.4.
-
Page 10: General Maintenance
6. GENERAL MAINTENANCE Do not at any time let brake fluids, gasoline, petroleum based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury. 6.1. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. -
Page 11: Genpower Contact Details
9.3. Email contact; Technical service@genpower.co.uk 9.4. Web site; www.hyundaipowerequipment.co.uk 10. DECLARATIONS OF CONFORMITY 10.1. Genpower Ltd confirms that this Hyundai product conform to the following CE Directives; 10.1.1. 2006/42/EC Machinery Directive 10.1.2. 2004/108/EC EMC Directive 10.1.3. 2006/95/EC Low Voltage Directive Page 11... - Page 12 Page 12...