Advertisement
correctly installed and meet all conditions necessary for the proper operation of the machine.
Damaged protection devices or parts must be repaired or replaced by a qualified specialist.
Have damaged switches replaced by a service center. Keep handles free of oil, grease and
resin.
Hazard generated by dust
Pay attention to the factors that influence exposure to dust, this includes:
-
Type of material being machined
-
Importance of local extraction (capture at source)
-
Proper adjustment of hood / baffles / chutes
A: The machine should be checked whether inner and outer blade cover、left and right side table
moving cover、inner and outer flange of blade and blade are proper before operation.
B: Pushing the moving worktable forward and check whether left and right table moving cover
and inner and outer blade touch each other so as to avoid unnecessary damage, while the log
saw is working
after engine starting.
SPECIAL SAFETY WARNINGS
Observe the permissible dimensions of logs to be cut (see "Technical Specifications").
Never cut several workpieces at the same time – and also no bundles containing several
individual pieces. Risk of personal injury if individual pieces are caught by the saw blade
uncontrolled. Never cut log containing the following:
-
ropes
-
cords
-
cables
-
wires
Do not overload machine – use it only within the performance range it was designed for (see
"Technical specifications").
Use this machine outdoor only.
6
Advertisement
