Advertisement
Gloves for handling saw blades (saw blades should be carried in a holder wherever
practicable).
9. Stop the machine running whilst unattended.
10. Report faults in the machine, including guards or saw blades, as soon as they are
discovered.
11. Adopt safe procedures for cleaning, maintenance and remove chips and dust regularly to
avoid the risk of fire.
12. Follow manufacturer's instructions for use, adjustment and repair of saw blades.
13. Observe the maximum speed marked on the saw blade.
14. To use correctly sharpened saw blades.
15. Refrain from removing any off-cut or other part of the workpiece from the cutting area whilst
the machine is running except by using a push stick.
16. Use the saw blades designed to reduce the emitted noise.
17. Ensure that guards and other safety devices necessary for machine operation are in position,
in good working order and properly maintained.
18. The saw blade made in conformity to EN847-1: 2013 shall be used on the machine.
19. Never dismantle the machineʼs safety devices or render them inoperative.
20. To rectify faults or remove jammed pieces of wood, always switch off the machine first. Stop
the engine!
21. Refit all guards and safety devices immediately after you have completed any repairs or
maintenance work.
22. Make sure you stand squarely and keep your balance at all times.
23. Each time before re-using the tool, carefully check that the guards or parts are working as
intended.
24. Check that the moving parts are in good working order, that they do not jam, and that no
parts are damaged. Make sure that all parts are fitted correctly and that all other operating
conditions are properly fulfilled.
25. Have damaged switches replaced by a customer service workshop.
26. Use only the transport devices to move the machine. Never use the guards for handling and
4
Advertisement
