Advertisement
moving the machine.
27. All operators must receive proper training in the use, adjustment and operation of the
machine.
28. Make sure that the flanges used are as specified by the manufacturer , suitable for the
intended use .
29. Make sure you include that necessary for operating the machine guards and other safety
devices are fitted, they are in good operating condition and properly maintained.
30. Do not use circular saw blades made of high-alloy high-speed steel
Risk of personal injury and crushing by moving parts!
Do not operate the machine without installed guard.
Keep sufficient distance to driven components when operating the machine.
Ensure the engine stopped before servicing.
Ensure that when switching on (e.g. after servicing) no tools or loose parts are left on or in the
machine.
Stop the engine if the machine is not used.
Hazard generated by modification of the machine or use of parts
not tested and approved by the equipment manufacturer!
Use only parts approved by the equipment manufacturer. This applies particularly to :
-
Saw blade (see "Technical specifications")
-
Engine (type: JF390)
Do not change any parts.
Hazard generated by machine defects!
Keep machine and accessories in good repair. Observe the maintenance instructions.
Before any use check machine for possible damage: before operating the machine all safety
devices, protective guards or slightly damaged parts need to be checked for proper function as
specified. Checked to see that all moving parts work properly and do not jam. All parts must be
5
Advertisement
