Table of Contents
Advertisement
4. ASSEMBLY
1. Open package and take out all parts. (see picture 1)
1. Main machine
2. Wheel parts
3. operating handle
4.ruler bar
5. wood supporter
2. Disassemble the spring pipe （ see picture 2 ） to put it into the right fixer, screw it with M18
anti-loose nut (see picture 4). Place the pedal in the guide and tighten the nut, also tighten the
pedal axle nut(see picture 5).
Picture 2
Picture 1
6. cover for working table
7.weight balancer
8. connect plate for working table
9. working table
Picture 3
09
Picture 4
Picture 5
Advertisement
Table of Contents
