Advertisement
Every 50 hours of operation
-
Check all screwed connections, tighten if necessary (Rocker and rocker stop must
remain movable)
Saw blade change
Danger!
Directly after cutting the saw blade can be very hot – burning hazard! Let a hot saw blade
cool down. Do not clean the saw blade with combustible liquids. Risk of injury, even with
the blade at standstill. Wear gloves when changing blades.
When assembling, observe the direction of rotation of saw blade!
Be careful of the pendulum when disassembling the saw! Hold it firmly in order to avoid
accidents and serious injuries. It is recommended to be 2 people for the blade changing.
1. Remove the protection bar.
2. Unscrew the hook which is on the base of the tool.
3. Unscrew the screw which is on the spring hose
4. Unscrew the screw which is on the right blade guard.
5. Hold the tool by the handle, and bring down the pendulum.
22
Advertisement
