Table of Contents

Advertisement

6
  Gasoline is a highly flammable and explosive liquid. Refuel in a well
ventilated area with the engine stopped.
  Use of gasoline with an ethanol content greater than 10% can damage
the engine and fuel system and will void the manufacturer's warranty.
  When refueling the generator, keep it away from cigarettes, open flames,
smoke and/or sparks.
  Place the generator at least 3 feet away from buildings or other
equipment during operation.
  Run the generator on a level surface. Tilting the generator may result in
fuel spills.
  Know how to stop the generator quickly and understand operation of
all the controls. Never permit anyone to operate the generator without
proper instructions.
  Keep children, pets and machinery with rotating parts away during
operation.
  Do not operate the generator in rain or snow.
  Do not allow any moisture to come in contact with the generator.
  Do not touch the spark plug while the engine is operating or shortly after
the engine has been shut down.

1.2 AC SAFETY

Warning!
Before connecting the generator to an electrical device or power cord:
  Make sure that everything is in proper working order. Faulty devices or
power cords can lead to an electrical shock.
  Turn off the generator immediately if the device begins to operate
abnormally. Then disconnect the device and investigate the problem.
  Make sure that the electrical rating of the device does not exceed that of
the generator. If the power level of the device is between the maximum
output power and the running power of the generator, the generator
should not be used for more than 30 minutes.
  Connections for standby power to a building's electrical system must be
done by a qualified electrician and must comply with all applicable laws
and electrical codes. Improper connections may cause serious injuries to
electrical workers during a power outage, and when the utility power is
restored, the generator may explode or cause fires. The generator shall
be connected through transfer equipment that switches all conductors
other than the equipment grounding conductor. The frame of the
generator shall be connected to an approved grounding electrode.
HY2200P

Advertisement

Table of Contents
loading

Table of Contents