Ac Parallel Operation - Hyundai HY3500P User Manual

5.4 AC PARALLEL OPERATION

(If equipped)
••••
WARNING!
••••
Only connect a parallel capable HY series inverter generator with
•••• ••
1
the approved parallel kit. Attempting to connect a different brand
or model in parallel with your generator will void your warranty
and could cause bodily harm.
Do not start the generators before connecting the parallel cable.
If the cable is connected while one generator is running it will be
overloaded and the 'reset' button will need to be pressed.
If the overload indicator light stays on after resetting the
generator stop the engine, wait for 5 minutes then restart it.
NOTE
For continuous operation do not exceed the combined rated power.
At max output the generators must not run longer than 30 min.
Stop the engine before connecting or removing the parallel cable.
For single unit operation the parallel cable must be removed.
1. Make sure both generators are OFF.
2. Connect the terminals of the parallel kit to the parallel socket of each generator.
3.
Start each engine according to 'Starting the Engine'. Confirm appliances are
turned off, then connect the appliance to the parallel kit.
4. Turn on the appliance.
••
•••• •• •• ••
•• ••
•••• •• •• •• ••
•• •• •• •• ••
•••• •• •• •• ••
•• •• •• •• ••
•• •• •• ••
2
•••• •• ••
•••• •• •• ••
•••• •• ••
•••• •• •• ••
•• ••
•• ••
••
••
••
3
21
•• •• ••
•• ••
•• •• ••
•• ••
4