Table of Contents
Advertisement
-30
-20
-30
-20
14
-20
0
3.2 ADD ENGINE OIL
-20
0
Oil Transfer Tool
Oil Transfer Tool
Min Oil Level
Min Oil Level
1.
Place the generator on a level surface.
2.
Unscrew and remove the engine access panel. Start at the tab and work
around the panel. This may require some force to loosen the snapfits.
3.
Unscrew the oil cap and clean the dipstick.
4.
Add 12 fl. oz / 0.35L of fresh engine oil then reinsert the oil cap without
threading it in. Remove the cap and examine the oil level on the dipstick.
5.
Add additional oil up to the maximum mark.
6.
Reinsert the oil cap and tighten securely. Replace the engine access panel
and screws.
NOTE
SAE 10W-30 or SAE synthetic 5W-30 is recommended for general use.
Use of synthetic oil does not change maintenance intervals.
Oil Capacity: 12 fl.oz / 0.35L
DO NOT OVERFILL.
5W-30
0°C
-10
0°C
-10
32°F
20
40
32°F
20
40
Oil Cap & Dipstick
Oil Cap & Dipstick
Oil Capacity
Oil Capacity
12 . Oz / 0.35L
12 . Oz / 0.35L
10
20
10
20
60
80
60
80
30
40
30
40
HY2200P
100
120
100
120
Max Oil Level
Max Oil Level
50
°C
50
°C
°F
°F
Advertisement
Table of Contents
