Busy Channel Lockout; Radio's Dtmf Self Id Enquiry; 5Tone Self Id Enquir; Tot (Time-Out Timer) - AnyTone AM-580 User Manual

7 General Setting

buSY chAnnel lockout

With this function on, the transceiver will not transmit on a busy
channel, to avoid disturbing other transceiver using same frequency.
Once the channel is busy and you press PTT, the transceiver will beep as
warning and return to receiving.
11
Press key to enter function menu.
21
Turn the Main band selector knob to
choose No38 menu. The LCD displays "REPLOCK"
31
Press the Main band selector knob to enter function setup.
41
Switch the Main band selector knob to choose wanted value.
RLORP: Signaling busy lockout, transmitting is inhibited when current
channel receives a matching carrier but dis-matching CTCSS/
DCS.
RLOBU: Channel busy lockout, tran smitting
is inhibited when current channel
receives a matching carrier;
27
OFF: Busy channel lockout is disabled.
Transmitting is allowed in any receiving status
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.

RAdio'S dtMF SelF id enquiRY

11
Press key to enter function menu.
21
Switch the selector knob to choose No 39
function. The LCD displays "DTMF ID"
31
Press the Main band selector knob to
enter function setup. The LCD will show
the DTMF self ID.
41
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.
580
.
key to store value and
key or hold selector knob for over
key to store value and
key or hold selector knob for over
5tone SelF id enquiRY
11
Press key to enter function menu.
21
Switch the selector knob to choose No40
function. The LCD displays "5TONE ID"
31
Press the Main band selector knob to
enter function setup. The LCD will show the DTMF self ID.
41
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.

tot (tiMe-out tiMeR)

The time-out timer limits the amount of continuous transmitting time.
When the transmitting reaches the time limit which has been
programmed, the transmission will be cut off and emit warning beep.
11
Press key to enter function menu.
21
Turn the Main band selector knob to
choose No41 menu. The LCD displays "TOT"
31
Press the Main band selector knob to enter function setup.
41
Switch the Main band selector knob to choose wanted value.
1-30 MIN, total 30 levels,
OFF: TOT is turn off.
51
Press the Main band selector knob or
back to function menu. Press
0.5 second to store setup and exit.
key to store value and
key or hold selector knob for over
key to store value and
key or hold selector knob for over