Channel Menu - AnyTone AT- 778UV Instruction Manual

8. CHANNEL MENU

1. Hold [FUNC] key to enter SELECT MENU interface.
2. Short press [P4] key, [P6] key or turn channel knob to choose menu list. Short press [P5]
key can fast turn page.
3. Press [PUSH] button to enter CHAN MENU list
4. Short press [P4],[P6] key or turn channel knob to choose wanted setting
8.1 RCDT (CTCSS/DCS Decode Setup)
1. Enter CHAN MENU, choose No.1 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting
OFF: Turn off CTCSS/DCS decode.
CTCSS: Choose CTCSS decode.
DCS: Choose DCS decode.
4. When choose CTCSS/DCS decode, press [PUSH] button to enter CTCSS/DCS decode
setup, then turn channel knob to choose wanted CTCSS/DCS decode.
DCS: 000N-777I, total 1024 groups
N is positive code, I is inverse code.
Press [FUNC] key can choose positive or inverse code
5.
»
mode setup. (Refer to Signaling Combination setup in page 21).
8.2 CTCSS/DCS Encode Setup
1. Enter CHAN MENU, choose No.2 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting.
OFF: Turn off CTCSS/DCS encode.
CTCSS: Choose CTCSS encode.
DCS: Choose DCS encode.
4. When choose CTCSS/DCS encode, press (PUSH) button to enter CTCSS/DCS
encode setup, then turn channel knob to choose wanted CTCSS/DCS encode.
DCS: 000N-777I, total 1024 groups
N is positive code, I is inverse code.
5.
8.3 HIGH/MID/LOW Power Selection
1.
2. Press [PUSH] button, the menu value in LCD turns to green color
21
AT-778UV UHF/VHF Two Way Radio