Table of Contents
Advertisement
These instructions for installation and use are
intended for owners of saunas, heaters and control
units, persons in charge of managing saunas,
heaters and control units, and for electricians
responsible for installing heaters and control units.
Once the control unit is installed, these instructions
of installation and use are handed over to the owner
of the sauna, heater and control unit, or to the
person in charge of maintaining them.
CONTROL UNIT HARVIA XENIO (CX170)
Control unit's purpose of use: the control unit is
meant for controlling the functions of a sauna
heater. It is not to be used for any other purpose.
Congratulations on making an excellent choice!
CONTENTS
1. HARVIA XENIO ........................................................... 3
1.1. General .............................................................. 3
1.2. Technical Data .................................................... 4
1.3. Troubleshooting .................................................. 4
2. INSTRUCTIONS FOR USE ............................................. 5
2.1. Using the Heater ................................................. 5
2.1.1. Heater On .................................................. 5
2.1.2. Heater Off .................................................. 5
2.2. Changing the Settings.......................................... 5
2.3. Using Accessories ............................................... 5
2.3.1. Lighting ..................................................... 5
2.3.2. Ventilation ................................................. 5
2.3.3. Safety switch ............................................. 5
2.4. Control panel lock ............................................... 8
2.5. Remote control ................................................... 8
2.6. Power saving mode ............................................. 8
3. INSTRUCTIONS FOR INSTALLATION ............................. 9
3.1. Installing the Control Panel ................................... 9
3.2. Installing the Power Unit .................................... 10
3.2.1. Electrical Connections .............................. 10
3.2.2. Power Unit Fuse Faults .............................. 10
3.2.3. Power extension unit LTY17 (optional) ........ 10
3.3. Installing the Temperature Sensor ....................... 13
3.4. Resetting the Overheat Protector......................... 13
4. SPARE PARTS .......................................................... 14
Advertisement
Table of Contents
