How To Replace A Fuse - Enthermics Titan & Comfort Series Operator's Manual

How to Replace a Fuse

Procedure
Result
B la n k et W ar m er Op e r at or ' s Man u a l
▪
WARNING:
Use only UL listed 10A, 250V fast acting fuses, 5mm x 20mm (F1,
F2). Access should be made by qualified service technicians only.
To replace a fuse, do the following.
Step Action
1. Press and hold the standby button
release the button.
Set
2. the power switch
a
3. Unplug the power cord from the electric power source and the power inlet
on the warmer.
4. Pinch the side tabs and pull out the fuse drawer
5. Remove the fuse
6. Replace the fuse with a new fuse.
Re-install
7. the fuse drawer.
The fuse has now been replaced.
MN -3 9 92 4 Re v 4 8 / 2 0
▪ ▪ ▪
Fire and electrical shock hazard.
until the screen turns off, then
a
to the OFF (0) position.
c .
T
ROUBLESHOOTING
EC-TS-008697
b
.
c
b
EC-TS-008700
51