Operation; Preparing The Warmer For First Use - Enthermics Titan & Comfort Series Operator's Manual

Preparing the Warmer for First Use

Before you begin
Procedure
Result
Bl a n k et W ar m er Op e r at or ' s Man u a l
▪
CAUTION:
Allow the warmer to cool before cleaning.
Do not use:
NOTICE
▪
abrasive cleaning compounds.
▪
chloride based cleaners.
▪
commercial or household cleaners containing ammonia.
To prepare the warmer for first use, do the following.
Step Action
1. Make sure that the warmer is turned off and cool.
2. Wipe the outside of the warmer:
with a stainless steel cleaner, if stainless steel panels.
▪
with an approved cleaning agent, if painted panels.
▪
3. Clean the interior of the warmer with a damp cloth or approved cleaning
agent.
Dry
4. the interior and exterior of the warmer with a clean, lint-free cloth.
Leave
the door open until the interior of the warmer completely dries.
5. Clean each side of the window pane with glass cleaner or distilled vinegar.
The warmer is now ready for use.
MN -3 9 92 4 Re v 4 8 / 2 0
▪ ▪ ▪
Burn hazard.
O
PERATION
33