How To Use Signature Capture - Magtek DynaFlex II Series Installation And Operation Manual

6 - Operation

6.8.9 How to Use Signature Capture

Do not use a stylus or other hard object on the touchscreen. The touchscreen is designed
for fingers only and can be scratched if misused.
When a device with a display prompts cardholders with
Capture Requested) cardholders should use the tips of their finger to press and glide against the screen
to sign, then press the
OK
button.
Clear
Devices that do not have a touchscreen display cannot prompt for or collect a signature. When these
devices are aware that a signature is required to complete a transaction, they send a notification message
to the host that includes the status Signature Capture Requested. In this case, the solution design
collects the cardholder's signature via a different method.
DynaFlex II| Product Family | Installation and Operation Manual
button. To clear the current signature on the display and start over, press the
Figure 6-22 - Signature Capture Requested
Page 61 of 78 (D998200554-10)
, (Figure 6-22 - Signature
PLEASE SIGN