Device Information Page; Connection Status Page - Magtek DynaFlex II Series Installation And Operation Manual

6 - Operation

6.4.2 Device Information Page

While powering up, the display briefly shows a page of information about the device, including the
installed firmware part numbers and versions and other identifying information. To determine a device's
PCI certification status, compare the contents of this screen to the device's listing on
www.pcisecuritystandards.org, Approved PTS Devices. Note that in PCI listings, lowercase "x" is a
wildcard meaning 'any single character.'
To view details pertinent to the device's PCI certification status on WLAN enabled devices - including
the installed firmware part numbers and versions as well as other identifying information (see Figure 6-4)
- complete the following actions:
While on the
Welcome
then select , and
Firmware

6.4.3 Connection Status Page

In addition to the icons at the top of the display, WLAN enabled devices have a
that reports more details about the device's 802.11 wireless (see Figure 6-5). To access it, while on the
screen, press the Pushbutton and hold for 3 beeps to get to the
Welcome
, and
Connection WLAN Settings
and
Back Exit
DynaFlex II| Product Family | Installation and Operation Manual
Figure 6-3 - Device Information Screen
screen, press the Pushbutton and hold for 3 beeps to access to
to return to the
Main
Figure 6-4 - Device Information Screen for WLAN device
, and
WLAN Status
Page 37 of 78 (D998200554-10)
screen, select
Welcome
. To return to the
Settings
and
Back Exit
screen
WLAN Status
menu, then select
Settings
screen, select
Welcome
menu,