Magtek DynaFlex II Series Installation And Operation Manual page 47

6 - Operation
iv) The device shows
d) The device ends the transaction and reports the transaction status to the host.
6) If the device cannot read the card's magnetic stripe data:
a) The device turns LED4 red for a brief time.
b) The device beeps twice.
c) The device ends the transaction.
d) Devices with a display show
section 6.4.1Welcome Page / Active Idle Page).
e) The device notifies the host that the transaction failed. If this occurs, the host software may
choose to retry the transaction or revert to prompting the operator to enter card data manually (see
section 6.8.6 How to Enter Card Information Manually).
Immediately after the user swipes a magnetic stripe card, the device disables the option to use the
contactless interface. If the cardholder needs to revert to a contactless card or device for payment while a
transaction is in process, the operator should cancel the transaction and start again.
DynaFlex II| Product Family | Installation and Operation Manual
.
THANK YOU
, then
FAILED THANK YOU
Figure 6-8 – Example Card Swipe Screens
Page 47 of 78 (D998200554-10)
, then return to the idle page (see