System Health And System Id Indicator Codes - Dell EMC PowerEdge T440 TG9M2 User Manual

System health and system ID indicator codes

The system health and system ID button
Figure 7. System health and system ID buttons
Table 3. System health and system ID indicator codes
System health and system ID indicator code
Solid blue
Blinking blue
Solid amber
Blinking amber
Related link
Getting help
16 Installation and Service Manual
Dell EMC PowerEdge T440 overview
is located on the front panel of your system.
Condition
Indicates that the system is turned on, system is healthy, and system
ID mode is not active. Press the system health and system ID button
to switch to system ID mode.
Indicates that the system ID mode is active. Press the system health
and system ID button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem persists,
see the Getting help section.
Indicates that the system is experiencing a fault. Check the System
Event Log for specific error messages. For more information about
error messages, see the Dell Event and Error Messages Reference
Guide at Dell.com/openmanagemanuals > OpenManage software.