System Memory - Dell EMC PowerEdge T440 TG9M2 User Manual

Table of Contents

Advertisement

Figure 48. Cable routing - 4 x 3.5 inch cabled HDD
1
cable retention latch
3
cabled HDD

System memory

The system supports DDR4 registered DIMMs (RDIMMs). System memory holds the instructions that are executed by the processor.
NOTE:
MT/s indicates DIMM speed in MegaTransfers per second.
Memory bus operating frequency can be 2666 MT/s, 2400 MT/s, or 2133 MT/s depending on the following factors:
DIMM type (RDIMM)
Number of DIMMs populated per channel
System profile selected (for example, Performance Optimized, Custom, or Dense Configuration Optimized)
Maximum supported DIMM frequency of the processors
Your system contains 16 memory sockets. CPU1 supports up to 10 DIMMs and CPU2 supports up to 6 DIMMS.
Memory channels are organized as follows:
96
Installation and Service Manual
Installing and removing system components
2
signal cable

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emc poweredge t440

Table of Contents