Table of Contents
Advertisement
•
Restore data from a previously created Hardware Server Profile, press F10
NOTE:
When the restore process is complete, BIOS prompts to restore the system configuration
data.
•
To restore the system configuration data, press Y
•
To use the default configuration settings, press N
NOTE:
After the restore process is complete, system reboots.
Manually update the Service Tag
After replacing a system board, if Easy Restore fails, follow this process to manually enter the Service Tag, using System Setup.
About this task
If you know the system service tag, use the System Setup menu to enter the service tag.
Steps
1
Turn on the system.
2
To enter the System Setup, press F2.
3
Click Service Tag Settings.
4
Enter the service tag.
NOTE:
You can enter the service tag only when the Service Tag field is empty. Ensure that you enter the correct service
tag. Once the service tag is entered, it cannot be updated or changed.
5
Click OK.
142
Installation and Service Manual
Installing and removing system components
Advertisement
Table of Contents
