Table of Contents
Advertisement
Step 3: Trigger Height
Follow this procedure to ensure the gun triggers prop-
erly during a purge.
1. Insert the gun into the Gun Flush Box.
2. Force the cylinder triggers on by connecting air to
the C bulkhead (K). See Fig. 9. Turn on the air to
extend both cylinders.
3. Loosen both screws (L) on the side of the box. See
Fig. 10.
Fig. 9
Fig. 10
Adjustments
K
L
4. Raise the gun holder (M) until the pin (N) opens
the trigger. See Figs. 11 and 12.
NOTE: Inside the gun flush box are markings for the
PROt 3500, PROt 4500, and Air Spray Guns. These
markings are only general guidelines of where to
position the gun holder.
Fig. 11
Fig. 12
M
N
684019
11
Advertisement
Table of Contents
