Gun Guide - Graco Gun Flush Box 570046 Instructions-Parts List Manual

Step 4: Gun Guide
Follow this procedure to ensure the gun guide is
adjusted so the door will close completely when the
gun is in the box.
1. Insert the gun into the box.
2. Loosen the screws (J) on top of the door, then fully
close the door. See Fig. 13.
3. Slide the gun guide forward to fit snugly against the
gun body.
4. Mark the location of the screws (H), then tighten
the screws (J) in the new location. See Fig. 14.
5. Make sure the gun is secure. If the gun guide is
properly adjusted, the gun should not move easily
from side to side.
Fig. 13
12 684019
Adjustments
J
Fig. 14
H