Graco Gun Flush Box 570046 Instructions-Parts List Manual page 19

Table of Contents

Gun Flush Box Controller 570262 Operation (continued)

NOTE: The following instructions are not for use with the PrecisionMix II system. See your PrecisionMix II system

manual 308916 for operation instructions.

Single Gun Flush Box

General

1. Complete the operating checklist.

2. If cleaning an electrostatic gun, turn off the electro-

statics (P). See Fig. 20.

Fig. 20

3. Open the Gun Flush Box door. Place the gun (Q) in

the box and close the door. See Figs. 21 and 22.

WARNING

FIRE AND EXPLOSION HAZARD

For Electrostatic Guns: To reduce the

risk of fire, explosion, or electric shock,

always turn off the electrostatics on an

electrostatic gun before placing the gun

in the Gun Flush Box.

Resetting Alarms

To reset an alarm when the alarm light is solid red, turn

the Operator Station switch from MIX to STANDBY.

See Fig. 23. See Troubleshooting, page 22.

Operation

Fig. 21

Fig. 22

To reset an alarm when the alarm light is flashing (pot

life alarm), follow the Pot Life Monitor and Alarm

procedure, page 21.

NOTE: The first three PrecisionMix alarms will be reset

by the Gun Flush Box controller to prevent nuisance

alarms during flushing and loading.

684019

Table of Contents