Startup / Operation - BOMANN VS 7316.1 H Instruction Manual

• Tilt the appliance back slightly and lock it in this
position. Unscrew the feet and disassemble the
lower door hinge.
• Transfer and attach the lower door hinge to the
opposite side of the appliance. Screw in the feet
accordingly.
• Place the appliance back in the upright position.
Put on the appliance door and fix it in the intend-
ed position.
• Transfer and fix the upper door hinge to the op-
posite side of the appliance; after unscrewing the
hinge pin and inserting it from the other hinge
side.
• Put on the hinge cover
cap.
• Disassemble the door handle and install it on the
corresponding other outside of the door. Observe
the instructions under
dle"
. Move the cover caps to the exposed holes
on the corresponding other outside of the door.
• Check whether the door is optimally aligned verti-
cally and horizontally so that smooth opening and
closing of the door is ensured.
Check that the door is optimally aligned both vertical-
ly and horizontally to ensure smooth opening and
closing of the door.

Startup / Operation

Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
"Cleaning and maintenance".
the chapter
(*supplied)
and the blind
"Assembling the door han-
Starting the appliance
• Connect the appliance to the power supply.
• Set the operating conditions. See also the follow-
ing sections.
Settings
Position [ 0 ] means that the appliance is in the
switched-off state. Turn the temperature control
clockwise from this position, the appliance switches
on automatically.
The power levels control the different values of the
internal temperature.
Power level
lowest level,
1, 2
warmest internal temperature
medium level,
3, 4
optimal operating temperature
highest level,
5, 6, 7*
coldest internal temperature
*Beware of high setting because the maximum level may
already mean "freezing point".
Basically, the temperature changes depending on the
ambient temperature (place of installation), the fre-
quency of opening the door and the equipment.
For initial operation, first set the lowest possible in-
ternal temperature (= highest power level) until the
appliance has reached the desired operating tem-
perature. It is recommended to reset to a medium
power level afterwards, then you can easily make
any temperature correction.
Recommendation, for optimized food storage and to
avoid food waste, a medium power level is generally
best. A high power level also increases energy con-
sumption.
The recommended temperature in the center of the
fridge is approx. 4∼7 degrees. If the temperature in
22