BOMANN VS 7316.1 H Instruction Manual page 21

Household- larder
Table of Contents

Advertisement

Available languages

Available languages

Leveling the appliance
Slight unevenness in the floor can be leveled out
using the front feet.
Check whether the appliance is leveled horizontally.
If the appliance is not in balance, the feet must be
adjusted.
Electrical connection
WARNING:
• The installation to the mains supply must conform
to the local standards and regulations.
• Improper connection may cause to an electric
shock!
• Do not modify the appliance plug. If the plug does
not fit properly to the outlet, let install a proper
outlet by an authorized specialist.
• The accessibility of the power plug must be en-
sured to disconnect the appliance from the power
supply in case of emergency.
• Make sure that the voltage supply matches the
specifications on the rating label before connect-
ing.
• Remove the hinge cover and the blind cap.
• Disassemble the upper door hinge and lift out the
appliance door.
• Connect the mains cable to a properly installed
and earthed wall outlet.
• If the plug after installation is not accessible, a
corresponding disconnect device must be availa-
ble to meet the relevant safety regulations.
Reversing the door opening
If required, the door opening can be moved from the
right (supplied condition) to the left side.
WARNING:
When replacing the door stop, the appliance must be
disconnected from the power supply first.
NOTE:
• Ask another person to assist.
You possibly need:
driver as well as a thin-blade screwdriver.
*Delivery scope!
Keep the parts to be replaced for another possible
door stop change.
• Relocate the door stop on the underside of the
door. Set the appliance door safely aside.
21
screw wrench, Phillips screw-

Advertisement

Table of Contents
loading

Table of Contents