Plug-In Module Errors - Agilent Technologies 34901A User Manual

Chapter 6 Error Messages

Plug-In Module Errors

Plug-In Module Errors
NOTE: The following error messages indicate possible hardware
failures within the instrument. If any of the following errors occur,
contact your nearest Agilent Service Center for repair.
901 Module hardware: unexpected data received
902 Module hardware: missing stop bit
903 Module hardware: data overrun
904 Module hardware: protocol violation
905 Module hardware: early end of data
906 Module hardware: missing end of data
907 Module hardware: module srq signal stuck low
908 Module hardware: not responding
910 Module reported an unknown module type
911 Module reported command buffer overflow
Module reported command syntax error
912
Module reported nonvolatile memory fault
913
Module reported temperature sensor fault
914
Module reported firmware defect
915
Module reported incorrect firmware installed
916
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
6
317