Remote Interface Reference
•
SCPI Command Summary, starting on page 181
•
Simplified Programming Overview, starting on page 201
•
The MEASure? and CONFigure Commands, starting on page 207
•
Setting the Function, Range, and Resolution, starting on page 214
•
Temperature Configuration Commands, starting on page 219
•
Voltage Configuration Commands, on page 223
•
Resistance Configuration Commands, on page 224
•
Current Configuration Commands, on page 224
•
Frequency Configuration Commands, on page 225
•
Scanning Overview, starting on page 226
•
Single-Channel Monitoring Overview, starting on page 237
•
Scanning With an External Instrument, starting on page 239
•
Mx+B Scaling Overview, starting on page 244
•
Alarm System Overview, starting on page 247
•
Digital Input Commands, on page 255
•
Totalizer Commands, starting on page 256
•
Digital Output Commands, on page 258
•
DAC Output Commands, on page 258
•
Switch Control Commands, on page 259
•
State Storage Commands, on page 261
•
System-Related Commands, starting on page 264
•
Interface Configuration Commands, on page 269
•
RS-232 Interface Configuration, on page 270
•
Modem Communications, on page 274
•
The SCPI Status System, starting on page 275
•
Status System Commands, starting on page 286
•
Calibration Commands, starting on page 292
•
Service-Related Commands, starting on page 294
•
An Introduction to the SCPI Language, starting on page 296
•
Using Device Clear, on page 302
If you are a first-time user of the SCPI language, you may want to refer to these
sections to become familiar with the language before attempting to program the
instrument.
180
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com