Table of Contents
Advertisement
Performing a test print
1. Click Print to perform a test print.
2. Tap No if the test print was unsuccessful. Then, tap Print Again. If the second test print was
unsuccessful, please contact us using the contact options.
3. Tap Yes if your test print was successful.
4. Tap Get Started. PitneyShip will now set up your experience. This could take a few minutes to
complete.
Your PitneyShip Cube setup is now complete.
Installing PitneyShip Cube on a Mac using a wireless
connection (new user)
These instructions will guide you through a first-time installation of your PitneyShip Cube on a Mac
device as a new PitneyShip user. These instructions are for users wanting to connect their PitneyShip
Cube using a Wi-Fi connection. Before you begin your installation, you will need your mobile device to
establish a Wi-Fi connection. .
1.
Opening the box and unpacking
2.
Creating your PitneyShip account
3.
Connecting your PitneyShip Cube
4.
Performing a test print
Pitney Bowes
User Guide
June 2023
1 • Installation
40
Advertisement
Table of Contents
