Table of Contents
Advertisement
Safety
n
To reduce the risk of fire or electrical shock, DO NOT attempt to remove covers or disassemble
the control panel or its base. The cabinet encloses hazardous parts. If your should drop or
otherwise damage the unit, call Pitney Bowes.
n
Use only Pitney Bowes approved direct thermal label media.
n
Keep fingers, long hair, jewelry and loose clothing away from moving parts at all times.
n
Avoid touching moving parts or materials while the printer is in use. Before clearing a stall (jam),
be sure printer mechanisms come to a complete stop.
n
To prevent overheating, do not cover the vent openings.
n
When removing stalled material, avoid using too much force to protect against minor personal
injury and damage to the equipment.
n
Use the equipment only for its intended purpose.
n
Always follow the specific occupational safety and health standards prescribed for your
workplace.
n
DO NOT insert anything into the tape slot from the outside of the printer, there is a cutter
operating in the slot that cuts the tape.
Caution: Changes or modifications to this equipment not expressly approved by the part
responsible for compliance could void the user's authority to operate the equipment.
If using USB interface, shielded I/O cables must be used with this equipment to ensure compliance
with the limits. Use of unshielded cables is prohibited.
International ENERGY STAR® Qualification Statement
The purpose of the International ENERGY STAR® Program is to promote the
development and popularization of energy- efficient office equipment. As an
ENERGY STAR® Partner, BIXOLON Co., Ltd. has determined that this product
meets the ENERGY STAR® specifications for energy efficiency.
Pitney Bowes
User Guide
June 2023
100
Advertisement
Table of Contents
