Hytera TC- 446S Manual page 19

Troubleshooting
Irrelevant communications or
noises are heard on the chan-
nel.
The noise is too loud.
If the above solutions can not fix your problems, or you may have some other troubles, please contact us or your local dealer for more
technical support.
You may be interrupted by radios
using the same frequency.
The radio may not be set with any
signaling.
You may be too far away from other
members.
You may be at an unfavorable positi-
on. For example, your communication
may be blocked by high buildings or
frustrated in the underground areas.
You may suffer from external distur-
bance (such as electromagnetic
interference).
Change the frequency, or adjust the squelch level.
Set signaling for all member radios to avoid interfe-
rence at the same frequency.
Move towards other members, power off your radio
and then restart it.
Move to an open and flat area, and restart the radio.
Stay away from equipment that may cause interfe-
rence.
TC- 446S TC- 446S
15