Table of Contents
Advertisement
b. Press the Menu Select button directly below Yes to proceed.
The display shows Please wait to indicate clearing is in progress.
If successful, the display shows All BT devices cleared.
If unsuccessful, you hear the radio sounds a short, low-pitched tone. The display shows
Clear all BT devices failed. The display returns to Bluetooth feature screen.
Postrequisites:
NOTICE: If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys
on all previously paired devices as well. (Please see your accessories manual for further
details.)
6.19.11
Pairing with LEX Handheld
Prerequisites: Ensure that Bluetooth feature of your radio is on and the Bluetooth tones are enabled.
Procedure:
1 Turn on the handheld and activate the Bluetooth feature.
2 Place the handheld close to the radio aligning the Bluetooth Pairing Location on the handheld
with the Bluetooth Pairing Location on the radio.
If the pairing process is successful, you hear an incremental-pitched tone from the radio. The
radio begins to connect to the handheld. If the connecting process is successful, you hear an
incremental-pitched tone. The display shows <Device Friendly Name> connected, and
the Bluetooth icon turns from
If unsuccessful, one of the following scenarios occur:
•
You hear a short, low-pitched tone and the display shows Bluetooth pairing failed (if
pairing fails).
•
You hear a decremental-pitched tone and the display shows <Device Friendly Name>
unpaired (if the connection fails within 6 seconds).
•
You hear a short, low-pitched tone and the display shows <Device Friendly Name>
connect failed (if the radio has the pairing record of the handheld and the connection
fails).
Repeat this step to re-initiate the pairing process.
NOTICE: To unpair the handheld after a successful connection, follow the steps in
Viewing and Clearing the Bluetooth Device Information on page
6.19.12
Responder Alert Sensors
Responder alert sensors allow the radio to send an over-the-air (OTA) notification when the radio
receives the holster, weapon fired, and vest pierced sensor events.
To enable the feature, ensure that the GPS, Enhanced Data, and Bluetooth feature of your radio is on
and the radio supports Bluetooth Low Energy (BTLE).
to
.
MN004476A01-AE
Chapter 6: Advanced Features
105.
107
Advertisement
Table of Contents
