All product function is valid till 2015-03-16. Trademarks Product model, ALTIMIUM and its logo are trademarks of Altimium. Any other trademarks mentioned in this manual are acknowledged as the properties of the trademark owner. No part of this publication may be copied or reproduced without the prior written consent of Altimium.
Unplug the power cord when left unused for a long period of time. Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electricalwastes. Altimium www.altimium.com...
Notes:Check whether all the items listed above are included in your package. If not, contact your dealer to make up. Appearances ② Link led: Illuminate blue when FO1DV-4KT: connected with source; blink blue when capturing EDID data There are a Power led on its rear panel, it will illuminate red when powered on.
Page 5
Step3. Connect the receiver and a DVI sink device (e.g. a monitor) directly or over a DVI cable. Step4. Plug DC 5V power adapters to the Power ports of both the transmitter and the receiver. Altimium www.altimium.com...
1) To ensure normal and reliable transmission, plug the DVI display to the DVI In port of the transmitter, and stick the EDID Reader to manually capture the EDID data of the display. 2) Utilize OM3 optical fiber cable to connect the transmitter& receiver only. Specification Model FO1DV-4KT FO1DV-4KR Spec Input Input Signal 1 DVI...
EDID data before using. Change for signals that are Input signal is with HDCP not with HDCP. If your problem persists after following the above troubleshooting steps, seek further help from authorized dealer or our technical support. Altimium www.altimium.com...
Any transport costs are borne by the users during the warranty. 1) Product Limited Warranty: ALTIMIUM warrants that its products will be free from defects in materials and workmanship for two years, which starts from the first day you buy this product (The purchase invoice shall prevail).
Need help?
Do you have a question about the FO1DV-4KT and is the answer not in the manual?
Questions and answers