Related Manuals for Altimium TP422P-4K
Summary of Contents for Altimium TP422P-4K
- Page 1 User Manual TP422P-4K Ultra-thin HDBaseT Extender All Rights Reserved Version: TP422P-4K_2016V1.1...
-
Page 2: Fcc Statement
Any changes or modifications not expressly approved by the manufacture would void the user’s authority to operate the equipment. www.altimium.com... -
Page 3: Safety Precautions
Unplug the power cord when left unused for a long period of time. Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat them as normal electrical wastes. www.altimium.com... -
Page 4: Table Of Contents
3.1 Usage Precautions .................... 5 3.2 System Diagram ....................5 3.3 Connection Procedure ..................5 3.4 Application ......................6 4. Specification ....................... 7 5. Panel Drawing ......................9 6. Troubleshooting & Maintenance ................10 7. After-sales Service ....................11 www.altimium.com... -
Page 5: Introduction
8 x Black Plastic cushions 4 x Screws 2 x RS232 cables 1 x Power adapter (DC 24V 1.25A) 1 x User manual Notes: If you find any defective or missing parts, please contact your local dealer. www.Altimium.com... -
Page 6: Panel Description
CAT6a cable, support bi-directional PoH. ⑨ 100M Ethernet interface, when need to work in a LAN, one of ETHERNET these 4 ports (both the Ethernet ports of transmitter and ⑩ ETHERNET receiver) should be used for internet access, and the others can www.Altimium.com... -
Page 7: Receiver
Connect with 5V IR receiver (with carrier) to collect infrared signal, ⑤ IR IN work with far-end IR OUT port Connect with 5V IR Emitter to send infrared signal, work with far- ⑥ IR OUT end IR IN port ⑦ HDMI OUT Connect with HDMI display www.Altimium.com... -
Page 8: Twisted Pair Cable Description
Ground Ground 3--6 1--2 Notice: Cable connectors Ground Ground MUST be metal one, the 1--2 3--6 shielded layer of cable Group Group MUST be connected to the 7--8 7--8 connector’s metal shell, to Group Group make a better transmission. www.Altimium.com... -
Page 9: System Connection
For example: When “IR IN” of receiver connects with an IR receiver, the IR Emitter must be connected to “IR OUT” of transmitter. Step5. To set as a LAN, one of the four ETHERNET ports of transmitter and receiver should be used for Internet access, and the others can be connected with www.Altimium.com... -
Page 10: Application
Step7. Connect with DC24V power adaptor(s) separately or only connect power adaptor to transmitter or receiver. 3.4 Application Ultra-thin HDBaseT Extender has a good application in various occasions, such as computer realm, monitoring, big screen displaying, meeting room, education and bank & securities institution etc www.Altimium.com... -
Page 11: Specification
Adaptive 10M/100M (max), full duplex or half duplex. Speed General Transmission HDBaseT Mode 800x600@60Hz、1024x768@Hz、1280x720@60Hz、 1280x1024@60Hz 、1366x768@60Hz、1600x1200@60Hz Resolution 1920x1080@60Hz、1920x1200@60Hz、3D、4K×2K 1080P ≤ 100m; Transmission 4K×2K ≤ 70m Distance Bandwidth 10.2Gbps HDMI Standard HDMI1.4 & HDCP2.2 75Ω Impedance 0~ 50℃ Temperature 0% ~ 90% Humidity Power Consumption www.Altimium.com... - Page 12 Ultra-thin HDBaseT Extender Power Supply Input: 100VAC~240VAC, 50/60Hz; Output: 24VDC 1.25A Dimension 152mmx16.2mmx104mm 152mmx16.2mmx104mm (W*H*D) Net Weight 235g 241g NOTE: All nominal levels are at ±10%. www.Altimium.com...
-
Page 13: Panel Drawing
Ultra-thin HDBaseT Extender 5. Panel Drawing LINK HDCP RS232 IR IN IR OUT HDMI IN HDBT OUT ETHERNET ETHERNET DC 24V 152 mm 5-1 Transmitter LINK HDCP RS232 IR IN IR OUT HDMI OUT HDBT IN ETHERNET ETHERNET DC 24V 152 mm 5-2 Receiver wwwAltimium.com... -
Page 14: Troubleshooting & Maintenance
Cannot control The device has already Send authorized device by RS232 / IR been broken dealer for repairing. If your problem persists after following the above troubleshooting steps, seek further help from authorized dealer or our technical support. www.Altimium.com... -
Page 15: After-Sales Service
3) Technical Support: Email to our after-sales department or make a call, please inform us the following information about your cases. Product version and name. Detailed failure situations. The formation of the cases. Remarks: For any questions or problems, please try to get help from your local distributor. www.Altimium.com... - Page 16 ALTIMIUM 587 Avenue Blaise Pascal 77550 MOISSY-CRAMAYEL Tél : 01.64.13.31.00 Fax: 01.60.29.62.70 Mail: contact@tesca-audio.com Web: www.altimium.com...
Need help?
Do you have a question about the TP422P-4K and is the answer not in the manual?
Questions and answers