BRC1E73
1. Operation mode
Used to display the current operation
•
mode: Cool, Heat, Vent, Fan, Dry or Auto.
In Auto mode, the actual operation mode
•
(Cool or Heat) will be also displayed.
Operation mode cannot be changed
•
when OFF is displayed.
Operation mode can be changed after
starting operation.
2. Fan Speed
Used to display the fan speed that is set for
•
the indoor unit.
The fan speed will not be displayed if the
•
connected model does not have fan speed
control functionality.
3. Setpoint
Used to display the setpoint for the indoor
•
unit.
Use the Celsius/Fahrenheit item in the
•
main menu to select the temperature unit
(Celsius or Fahrenheit).
4. Stand by for Defrost/Hot start
"
"
If ventilation icon is displayed in this field:
Indicates that an energy recovery ventilator
•
(ERV) is connected.
For details, refer to the Operation Manual of
the ERV.
5. Message
The following messages may be
displayed.
"This function is not available"
Displayed for a few seconds when an
•
Operation button is pressed and the indoor
unit does not provide the corresponding
function.
In a remote control group, the message will
•
not appear if at least one of the indoor units
provides the corresponding function.
105
"Error: Push Menu button"
"Warning: Push Menu button"
Displayed if an error or warning is detected.
•
"Time to clean filter"
"Time to clean element"
"Time to clean filter & element"
Displayed as a reminder when it is time to
•
clean the filter and/or element.
6. Ventilation
•
Displayed when an energy recovery
ventilator is connected.
Ventilation Mode icon."
•
These icons indicate the current ventilation
mode (ERV only) (AUTO, ERV, BYPASS).
Air Purify ICON "
•
This icon indicates that the air purifying unit
(Optional) is in operation.
7.
Key Lock
Displayed when the key lock is set.
•
8.
Scheduled
Displayed if the Schedule or Off timer is
•
enabled.
9. Under Centralized control "
Displayed if the system is under the
•
management of a multi-zone controller
(Optional) and the operation of the system
through the remote controller is limited.
10. Changeover controlled by the
master indoor unit "
(VRV only)
Displayed when another indoor unit on the
•
system has the authority to change the
operation mode between cool and heat.
SiUS092231E
"
"
"
"
Part 5 Remote Controller