Table of Contents
Advertisement
PRESYS
│ Instruments
2.1 - Calibrator Menu
To select the probe set point or electrical input functions, from the main menu, press
the CALIBRATOR button. The following screen is displayed.
At the top is shown the probe settings and values.
The centered value shows the block temperature. The
the temperature is stable, otherwise it is RED.
The set point value appears on the top. Touch in the SET bar or in the block
temperature value to change it. Pressing on the temperature unit it can be changed
between °C (Celsius), °F (Fahrenheit) or K (Kelvin).
Fig. 05 - Calibrator Function
Fig. 06 - Calibrator Mode
TA-1200PLAB
GREEN
color indicates that
Page 9
Advertisement
Table of Contents
