PRESYS
│ Instruments
Parameters: ---
Response: ---
SYSTem:LOCal
Description: Go to local mode
Parameters: ---
Response: ---
SYSTem:REMote
Description: IGo to remote mode
Parameters: ---
Response: ---
3.4 - System
In the SYSTEM tab you can configure the calibrator volume, adjust the
touchscreen, calibrator identification, language, printer and security options.
•
Touch Screen Options: To adjust the screen, press TOUCH SCREEN OPTIONS.
Press the center of the + signs on the screen (use of the touch screen pen is
recommended). After calibration, press the screen again at any point to confirm.
•
Language configuration: Select the desired language and confirm with OK. The
system must be restarted to save the new configuration.
•
Screen Brightness Adjustment: Select the desired screen brightness and confirm
with OK. The options are: 25%, 50%, 75% and 100%.
•
Calibrator identification: In this option it is possible to identify the calibrator,
choosing a TAG, company name and location.
•
Sound Options: Press + or - to set a value for the audio volume.
•
Security Options: Initially, the instrument does not have a password. This setting
can be changed in SECURITY OPTIONS.
To create a new user, press the key icon
and press CREATE. It is possible to add a signature to be used in issuing the TASKS
reports and certificates.
and then the users icon
TA-1200PLAB
. Fill in the blanks
Page 21