Services; Built-In Web Server - Presys TA-1200PLAB Technical Manual

PRESYS │ Instruments

3.3 - Services

In the SERVICES bar, the user can configure the communication types of the
calibrator, among other settings. The options are
• REMOTE ACCESS - Access options via WEBSERVER (Remote Server) and via VNC
(Virtual Network Computing)
• SERIAL COMMUNICATION - Serial communication settings
• FILE SHARING AND USB HOST CONTROL - Options for allowing / denying access to
file sharing and setting passwords
• SERVER ADDRESS - Setting the Remote Server address
• STARTUP MODE - The user selects whether he prefers the calibrator to start in calibrator
mode or on the main screen.

3.3.1 - Built-in Web Server

Connect the network cable into the Ethernet port of TA Calibrator on the side (see
Fig. 5).
To access the built-in webserver open the web browser on your computer and enter
the following address.
<calibrator_IP_address>:5000/taserver/pages/main.cgi
User: admin
Password: xvmaster
Fig. 16 - IP Address
TA-1200PLAB
Page 17