Table of Contents
Advertisement
PRESYS
Instruments
2.3 - Help Desk
The calibrator allows viewing of videos and documents. The videos can be viewed
while a calibration is performed and are intended to assist in the use of the calibrator. The
documents can be calibration procedures or instructions that can be stored and viewed on
the calibrator itself.
From the main menu, when selecting HELP DESK and the VIDEOS tab, a list of
video categories will appear. Select the desired category and video. Press the FULL
SCREEN option to view the video in full screen, or WINDOW for reduced screen. Selecting
the window option, it is possible to watch the video while using the calibrator functions.
To insert new videos in the calibrator, connect the USB cable to the computer (USB Type
A) and to the Calibrator (USB Type-B, see figure 05). Open the VIDEOS folder. Copy the
video to some subfolder (category) in the VIDEOS folder. If you prefer to create a new
category, just create a new folder within VIDEOS with the name of the desired category
and copy the file to this folder.
To insert documents, such as procedures or instructions, the files must be
converted into PDF files and must be saved inside the HELP folder on the SD card; Create
a folder with the same name as the document and insert it into this folder.
3 - SETTINGS
The SETTINGS menu has 4 divisions (tabs at the bottom): DATE AND TIME,
NETWORK, SERVICES and SYSTEM.
3.1 - Date and Time
The date, time and time zone for the calibrator can be set in the date and time bar.
You can also set the decimal separator for .CSV files between commas and periods.
3.2 - Network
In the NETWORK tab it is possible to configure the IP address of the calibrator for
communication with the computer and the Wi-fi (wireless) network. The IP address can be
configured dynamically (DHCP) or it can have a fixed address (Disable the DHCP option
and change the desired addresses).
Communication via Wi-fi is carried out via USB/WIFI adapter (optional item). In the
NETWORK tab it is possible to configure the device name (name that calibrator will be
displayed on the network). By selecting CONFIGURE WIRELESS NETWORK (WIFI) the
user can view the available networks and configure which network he wants to connect to.
Connecting the calibrator to the network it is possible to view and print Reports /
Certificates of the tasks through the computer. Press the indicated network icon to access
the configured IP address after connected to the network. When connected to the wireless
network, the icon will be the Wi-fi network
Page 16
fi network
TA-1200PLAB
Advertisement
Table of Contents
